|
|
| 136.
Pour a few drops of thin CA into the boom to lock the balsa plug in place. |
| 137.
Check the ballast position. Insert another small piece of balsa to move the ballast forward if needed. |
| 138.
Make 2 blanks from a large dowel, and a longer front block for locking the ballast in place. A tab from clear tape helps to pull the front block out of the fuselge. |
| 139.
Ready for the first flight after installing a receiver, a battery, and a switch. |
| 140.
Time to go to the flying field... |
| 141.
View from the bottom. Done! |
|
|
|